4D Acrylic Ghost and Pyramid Number Plates

For people who want that little bit extra we now offer these hybrid number plates. We take the best attributes from the 4D and the Resin 3D and bring them together in these stand out extra depth number plates. These new style number plates really do add the finishing touches.

This process next-level depth to your plates – Safe to pressure wash – Doesn’t fade in the sun – Industrial strength adhesive bonding.

Please note that by law we include our company name, postcode and BSAU number on the 4D number plates. The font style for all our plates is Charles Wright which is the legal UK road font, compliant with the law. To see more please use our number plate builder.

The standard UK size for number plates are 520mm by 111mm. Please note this will vary if you opt for a shortened plate. Shortened plates are cut down to a unique size depending on the length of your registration. If you require a specific size, please state this in the special requests box after clicking purchase. Legally, your number plates cannot have a margin any less than 11mm.

We stock and sell fixing kits which have been rigorously tested to ensure they provide the best mounting solutions for you to attach your new number plates to your vehicle. We have two options:

• Sticky Pad Fixing Kits

• Screw Fixing Kits

• Tamper Proof Fixing Kits

Sticky pad fixing kits include a pack of 10 industrial strength sticky pads, which will be enough to secure both a front and rear number plate to your vehicle.

Standard screw fixing kits include 4 screws, 2 white screw caps and 2 yellow screw caps to blend in with your number plates.

Tamper proof fixing kits include a tamper proof hex key and self tapping screws plus a selection of coloured plastic caps to hide the head of the screws once its in position.

UK law stipulates that number plates must display writing in an untitled font called Charles Wright. The letters and numbers must comply with specific spacing and alignment.

The current vehicle registration number format was introduced in 2001. It consists of:

• 2 letters (these refer to the region in the country where your vehicle was first registered)
• 2 numbers (these tell you when it was issued)
• 3 letters are chosen at random

By law, the DVLA requires the number plates on your vehicles to meet the following conditions:

• be made from a reflective material
• display black characters on a white background (for the front plate)
• display black characters on a yellow background (for the rear plate)
• not have a background pattern
• be marked to show who supplied the number plate
• be marked with a British Standard number – this is ‘BS AU 145e’ for plates fitted after 1 September 2021

The characters on your number plate must not be removable or reflective. If your number plates were fitted after 1 September 2021, they must also be a single shade of black.

On your number plate, the law allows you to have 3D (raised characters), certain flags, symbols and identifiers. If you have a zero-emission vehicle, your number plate is allowed to display a green flash.

Moreover, it is illegal to disfigure number plates in a way which makes them hard to read. For example, if your private plate has the number ‘1’, you cannot place a screw or bolt on top of it to make it look like the letter ‘I’.

Need more info about our 4D Acrylic With Gel Top Number Plates? Get in touch.